WCE 200 and WCE 400

Power amplifiers with class D amplifier.

The WCE series is composed of two reliable power amplifi ers. Thanks to their switching mode power supply, all the energy is dedicated to amplifi cation, with a very high power conversion efficiency.

The class D amplifier provides a reduction in size and weight of the unit, as well as a reduced power waste. Smaller heat sink and compact circuitry lead to a reduction in cost, being very convenient for common audio installations.

Technical data WCE 200:

  • Number of input channels: 2.
  • Number of output channels: 2.
  • 8 Ω stereo output power: 150 W.
  • 4 Ω stereo output power: 220 W.
  • 8 Ω bridge output power: 500 W.
  • 8 Ω parallel output power: 440 W.
  • Frequency response: 20 Hz – 20 kHz.
  • THD+N: 0.05%.
  • S/N ratio: >65 dB.
  • Factor damping: 300.
  • Voltage gain: 32 dB.
  • Input impedance: 20 kΩ (balanced).
  • Input sensitivity: 0.7 V. 2.48 V.
  • Rear panel connectors / controls: 2x XLR3 (balanced inputs), 1x bual RCA
  • (unbalanced inputs), 1x IEC (main supply), 2x Dual Binding Post (outputs). Operating mode switch (PR/ST/BR).
  • Protections:Main supply: AC 185-245V, 60/50 Hz.
  • Dimensions (WxHxD): 483 x 44 x 277 mm.
  • Weight: 3.2 kg.

Technical data WCE 400:

  • Number of input channels: 2.
  • Number of output channels: 2.
  • 8 Ω stereo output power: 220 W.
  • 4 Ω stereo output power: 380 W.
  • 8 Ω bridge output power: 800 W.
  • 8 Ω parallel output power: 760 W.
  • Frequency response: 20 Hz – 20 kHz.
  • THD+N: 0.05%.
  • S/N ratio: >67 dB.
  • Factor damping: 300.
  • Voltage gain: 32 dB.
  • Input impedance: 20 kΩ (balanced).
  • Input sensitivity: 0.8 V.
  • Rear panel connectors / controls: 2x XLR3 (balanced inputs), 1x bual RCA
  • (unbalanced inputs), 1x IEC (main supply), 2x Dual Binding Post (outputs). Operating mode switch (PR/ST/BR).
  • Protections:Main supply: AC 185-245V, 60/50 Hz.
  • Dimensions (WxHxD): 483 x 88 x 277 mm.
  • Weight: 4 kg.